Water-soluble Blastable Adhesive for Sandcarving
IKONICS Imaging liquid adhesive is a water-soluble adhesive that effectively transfers photoresist film to your substrate. This adhesive can be applied by brushing or spraying it directly on the object to be blasted. Simply apply a thin coat of adhesive to your object, adhere your photoresist mask, and sandblast. Can be used with all our photoresist films.
Spray-On Blastable Adhesive: Lower viscosity adhesive for spray-on application.
Brush-On Standard Blastable Adhesive: Higher viscosity adhesive for brush-on application.
Brush-On High-Tack Blastable Adhesive: Higher viscosity and higher tack adhesive for brush-on application. This high-tack version was designed to be used with our ImagePro Red and PB Vinyl films.
This product can expose you to chemicals including 1,4-dioxane, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
Spray-On Blastable Adhesive
• Lower viscosity for spray on application
• Available in gallon only
• Water-soluble
Brush-On Standard Blastable Adhesive
• Higher viscosity for brush on application
• Available in quart and gallon
• Water-soluble
Brush-On High-Tack Blastable Adhesive
• Higher viscosity for brush on application
• Higher tack designed for ImagePro Red and PB Vinyl films
• Available in quart only
• Water-soluble
